1.15.1 13/03/2020

Changements

• If a message gateway triggered a function block which contained a conditional statement, this condition was always true
• Improvement: A message gateway did trigger a function block only when mode was set to "message trigger". Now the trigger is also valid if the mode is set to "direct copy"

1.15.0 19/11/2019

Corrections de bugs

• Clear CF-card did not work correctly when is was done using a "default value" (at startup of the module) and the card was already full

1.14.4 08/06/2018

Améliorations

• Added "MaxSectorsToWrite" variable for CF trace

Corrections de bugs

• The internal hashkey calculation from CAN ID lead to an index outside of the corresponding data array. This could cause problems with the memory or processor crashes
• Routing tables were not processed correctly
• Fixed CAN_SetTransceiverMode() for HS8_GE. Listen-only was not possible

1.14 01/06/2015

Corrections de bugs

• Number of data objects that were saved to EEPROM was limited to 127

Changements

• Number of transmit messages increased from 120 to 350
• Number of data objects increased from 257 to 1272

1.13 31/03/2015

Améliorations

• Multiplexer option for CAN variables added
• Scale/Offset calculation order can be swapped for transmit messages (make it compatible to PCAN-Explorer behavior)

1.12 10/10/2014

Corrections de bugs

• Timeout of Selfhold signal freezed the Router Pro
• Fixed a problem with the Sleep-mode of the TH8056 transceiver (Single-wire)
• Concerning "Routing x to y, ex..." CAN-IDs are now limited to 2047. It was possible to enter higher values but this leads to a system freeze
• Trace Clear was deactivated completely

Changements

• Adjusted the Timing parameter for XMORE-CF-Cards

1.9 03/04/2013

Corrections de bugs

• Enhanced error management concerning the CF card interaction
• Trace Clear is now inactive by default
• Logging Error Frames is now inactive by default
• Improved error management when the resources are exhausted

Changements

• Receive messages quantity set from 50 to 120
• Transmit messages quantity set from 50 to 120
• Gateway messages quantity set from 50 to 120
• Defaults quantity set from 50 to 500
• Characteristic Curves quantity set from 10 to 20

1.7 07/12/2011

Améliorations

• Logging of error frames is now switchable for each CAN channel
• Suppression of the configuration ID 7E7h is now switchable for each CAN channel

Corrections de bugs

• Function block "hysteresis" now has a 5.th parameter "start mode"

1.6 11/10/2011

Améliorations

• Logging of CAN error frames. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0
• Number of logging sessions is no longer limited to 16. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0

Corrections de bugs

• Warning when exceeding hardware's resource limits. Attention: this feature requires a PPCAN-Editor 2 from version 2.0.3

1.5 19/05/2011

Changements

• Bug fix: Erroneous configuration may permanently block the device
• Added: "Route X to Y, all" can now be switched during runtime
• Changed device's resources:Characteristic Curves quantity set from  2 to 10Function Blocks quantity set from 50 to 120
• Characteristic Curves quantity set from  2 to 10
• Function Blocks quantity set from 50 to 120

1.4 18/10/2010

Changements

• Bug fix: Code incomplete for CAN channel 5 (CF card) (incl. extension of PEAK-Converter to 16 channels)
• Bug fix: Error when writing to EEPROM beyond 64 MB
• Changed device's resources:Receive messages quantity set from 35 to 50Transmit messages quantity set from 35 to 50Limits set from 10 to 5Strings set from 5 to 2
• Receive messages quantity set from 35 to 50
• Transmit messages quantity set from 35 to 50
• Limits set from 10 to 5
• Strings set from 5 to 2

1.3 10/06/2010

Changements

• Added listen-only mode

1.2 20/04/2010

Changements

• Various bug fixes
• First official release

1.1 25/03/2010

Changements

• Added new functions: real-time clock, beeper, and TJA1041 support

1.0

Changements

• Prototype release