Version 3.0.1 14/07/2025

Changements

• No automatic forwarding of http traffic to https

Version 3.0.0 16/10/2024

Améliorations

• Secure website access over https

Version 2.11.1 15/10/2024

Corrections de bugs

• Peers in other subnets could not be connected

Version 2.11.0 28/08/2024

Améliorations

• Revised default value definitions in Configuration File Format 2.0.2
• Erroneous configuration values corrected to defaults rather than limits
• Missing values now use defaults when absent from config files
• SJW value computation: 1 to TSEG2/2
• Bit rate strings now match register values and selection lists
• Time Segment 1 (Phase Segment 1 + Propagation Segment) limits validated during configuration
• Maximum Time Segment 1 set to 16
• Phase Segment 1 minimum increased from 1 to 2
• Propagation Segment minimum increased from 1 to 2

Corrections de bugs

• Route connection lost between PCAN-Gateway and Virtual PCAN-Gateway when CAN channel deactivated with message traffic
• CAN channel incorrectly reactivated via PCAN-View reset after deactivation
• Routes stopped functioning during reset while sending
• Incorrect ini file parameters (count_max < 0, count = 0) prevented route deletion
• Factory defaults reload failures in rare cases
• CAN channel reset via PCAN-View unavailable
• Deactivated CAN channels reactivated incorrectly during PCAN-View reset

Changements du site web embarqué

Routes

• New yellow warning status indicates successful route establishment but closed data connection
• Massive performance improvement for route presentation
• Expert mode: loopback routes (CAN 1<->CAN 2) configurable
• Port 52957 reserved for device scans, unavailable for routes
• Removed FPP stats from managed routes expert display
• Added microsecond units to CAN timeout display

Network Can

• Updated standard bit rate selection lists; removed impossible values
• Selection lists now display sample points (typically 80%)
• Expert mode: CAN error reporting and values (tx/rx) displayed when enabled

Device Configuration

• Configuration file upload limited to .ini type files

Device Software Update

• Enhanced confirmation text warning about downgrades; recommends configuration export before downgrade
• Software package upload limited to .tar files
• Status LED blinks during software update

Device User Management

• Fixed expert display mode switching issues
• Enhanced Public Dashboard description noting JSON interface effects

Responsive Design

• Fixed navigation presentation on displays <1024px width
• Corrected confirmation box positioning on mobile devices
• General improvements

Additional

• Device ID (settable via PCAN-View) displayed on Start, Status, Device pages with reload button
• Failed or in-progress software updates show warning with update.log link
• Auto-reload webpage during boot/reload until device ready
• Removed 3-second Illuminate function delay
• Fixed multiple confirm boxes when using Reboot
• Security improvements
• Website documentation updated

Changements de l'interface JSON

Routes

• New warning status (number 6) for successfully established routes with closed data connections
• Massive performance improvement for route information retrieval
• Empty/invalid port numbers caused HTML 500 errors; now handled properly
• Loopback routes (CAN 1<->CAN 2) configurable
• Port 52957 reserved for device scans

Can Configuration

• Empty clock values in bit rate strings caused 500 errors; fixed

General

• Device ID now readable via 'get device' command
• Special/UTF-8 characters no longer converted to ASCII
• Manual_bitrate parameter legacy support with br_def parameter
• Enhanced br_def validation; empty values produce errors
• Removed deprecated error code ERR_CAN_MANUAL_BITRATE_INC
• Improved JSON Shell responsive presentation
• Documentation updated

Version 2.9.1 16/02/2022

Améliorations

• Configuration format version updated to 2.0.1
• Version information at configuration file beginning
• New parameters for multiple settings
• Parameter name revisions
• Maximum routes configurable (0-64 range via count_max parameter)
• New WLAN parameter: startup_delay (seconds before wireless interface activation)
• New WLAN parameter: monitoring_delay (seconds before wireless interface status check)

Corrections de bugs

• Mask CAN filter acceptance mask/code fields swapped on web and JSON interfaces; corrected
• Route creation hangs during startup resolved
• Remote peer status update on route deletion corrected
• Send route connection failures fixed
• Broken .ini file imports now produce error messages instead of factory reset
• CAN interface resets via Virtual PCAN-Gateway crash prevention
• WLAN gateway early restart when switching Micro AP to Infrastructure mode (preventing proper saves)
• First character .ini file modification on startup fixed (power-loss corruption prevention)

Changements du site web embarqué

Network Can

• Three bit rate configuration options: Pre-defined list selection, Custom via register values, Custom via clock frequency and complete register string
• Clock frequency fixed to 24 MHz (read-only string display)
• Sample points displayed in info table
• User comments for CAN/Filters/Routes filtered for line breaks
• Improved configuration file import/parsing
• Acceptance code and mask values swapped for mask filters (definition matching)

General

• Website documentation updated

Changements de l'interface JSON

Features

• New 'can_fd_support' device property indicating CAN FD capability
• Standard bit rates now clock-dependent (24 MHz fixed on non-FD gateways)
• Parameter manual_bitrate renamed to br_def; legacy name still accepted
• Third bitrate definition mode (br_def mode 2) with single-parameter string configuration
• Documentation updated

Version 2.9.0 17/08/2020

Améliorations

• PCAN-Wireless Gateways can connect to hidden SSIDs (new boolean parameter ScanSSID, default 1)
• New CRC32 route connection frame type (PCAN-Gateway to PCAN-Gateway only)
• New handshake commands DEV_SET_ID_REQ and DEV_GET_ID_REQ (Virtual PCAN-Gateway v2.0.0+)
• INI file format version updated to 1.5.0

Corrections de bugs

• TCP_NODELAY flag explicitly set for server-side connections
• Route crash during remote site disconnection under special circumstances fixed
• Website/JSON interface malfunction after hundreds of requests resolved

Changements du site web embarqué

Control Box

• Function 'Status LED On' renamed to 'Illuminate'
• JSON Shell view activation creates navigation link
• Factory default login warning now links to login change page

General

• Route and filter notes available via Status, Routing, Filters, Login pages
• Website documentation revised
• Mobile web design enhanced

Network Can

• CAN interface information listing revised
• Reset button repositioned as header icon
• Auto resume, triple sampling, loopback, oneshot features displayed (device/support dependent)
• Sample point display revised (bit rate register value only)
• Normal mode sample point display added
• CAN register parameter listing order changed
• Custom bit rate form limits determined by product type
• HTML5 property validation for bit rate limits

Routing

• Overview lists detected devices from broadcast scan
• Bug fix: UDP route status LED correction for correctly connected Send routes
• Route status display revised for inverted connections

Managed Routes

• Expert mode displays CRC, CRC Start Value, CRC Polynomial, CRC Errors
• TCP Delay/TCP connected displayed only for TCP protocol
• Expert mode value display order changed

Add Edit Route

• Handshake toggle for inverted connections
• Bug fix: Inverted connection IP address reading corrected

Device Software Updates

• Direct download link for correct software package added

Changements de l'interface JSON

Routes

• CRC32 checksum frame transmission capability
• Properties: CRC_on, CRC_start_value, CRC_polynom (default values if unset)
• New error codes for CRC property processing

General

• Reboot command added with documentation
• JSON Shell header links redesigned as buttons

Bug Fixes

• Missing route/filter data requests now return errors
• Incorrect error messages for CAN register values corrected

Version 2.8.1 01/08/2019

Améliorations

• Route limit increased from 8 to 16
• Active routes stopped before network setting changes, automatically restarted afterward
• Component updates (PHP 7.3+) for future improvements
• Configuration ini file format updated to 1.4.1 (new CAN parameter: Enable_error_counter)

Changements du site web embarqué

General

• Website header redesigned: custom device name as main header; product name displayed if different
• Broadcast Scan improved: additional gateway products listed
• Web design improvements and documentation updates

Changements de l'interface JSON

Features

• New CAN properties: can_errors_rx, can_errors_tx (accessible via 'get can' or explicit property calls)
• New CAN property: CAN_error_reporting (indicates active/inactive error reporting; saved as Enable_error_counter in config.ini)

Version 2.7.0 19/06/2018

Améliorations

• JSON interface configuration on Device > Configuration page
• Four configuration options: Enable Interface, Enable Configuration, Enable Shell View, Respect Public Display
• Interface version displayed on Device page alongside other versions
• New route parameter: TCP connected (Expert mode display on Manage Routes)
• Enhanced route status: Send routes display yellow status if lacking matching Receive route
• All settings validation enhanced for JSON interface configuration
• Product picture updates (label revisions)
• Website error handling switched to error codes
• 'Reset after Login' checkbox added (Device > User Management)
• Website documentation comprehensively updated
• Default SSID changed to 'PEAK Wireless Default'
• CAN state description text enhancements
• Checkbox/radio button design revision
• Layout changes for improved readability/accessibility

Corrections de bugs

• UDP/route creation field visibility corrected
• CAN custom bit rate: lower limit calculation error fixed
• CAN-Status: Listen-Only mode now displays OK (green)
• Broadcast scan compatible with micro-AP operation mode
• Browser/mobile device layout support improvements
• Minor bug fixes

Changements de l'interface JSON

Features

• Complete implementation enabling custom software communication for monitoring/configuration
• Get parameter handling: cmd (proprietary), jcmd (JSON-formatted)
• Commands: get, set, delete, reset, help
• Shell view emulation for development/interface familiarization
• Complete documentation accessible via Shell view

Version 2.6.0 18/04/2017

Améliorations

• CAN traffic no longer required for outgoing TCP route reconnection; reconnection attempts forced after defined delay
• Route status display improved: connected device count processed; multiple connections show red LED
• TCP Delay property now indicated on Manage Routes (Expert mode default; Normal mode if non-default)
• TCP Delay deactivation available in Expert mode
• New ini format 1.3.1 including per-route delay parameter (Cdm)
• Port 45321 reserved for status transmission and PCAN-Gateway handshake
• Port validation checks when adding/editing routes
• Improved filter listing (Add Route/Edit Route pages): filter term and user notes displayed
• Improved CAN channel listing: channel number, bit rate, user notes
• User notes for routes (125 character maximum)
• Info icons on Manage Routes/Manage Filters for note display (hover tooltip)

Corrections de bugs

• Checkbox/radio button tooltips now display
• Mobile presentation and JavaScript-disabled page improvements
• DHCP usage corrections
• Minor bug fixes/changes

Changements

• Default WLAN operation mode changed to Micro Access Point (Windows 8.1+ Ad-Hoc incompatibility)
• Manage Routes: Expert mode information display revision
• Character # causes SSID/Netkey errors (prohibited character)
• Device > User Management: unavailable network interfaces now listed (future features)

Version 2.5.1 11/08/2015

Améliorations

• WLAN encryption key range validation added

Corrections de bugs

• WLAN devices: IP address change unavailable in micro-AP operation mode
• Route creation error: eighth route deleted after reboot
• Browser username save enabled on login page
• Layout/text updates; minor bug fixes

Changements

• WLAN web page layout revised for usability enhancement
• Broadcast scan duration: 10 seconds
• WLAN device IP address change time: 15 seconds

Version 2.5.0 12/06/2015

Améliorations

• New 'Filters' section with general information page
• New 'Manage Filters' page listing existing filters with control options
• New 'Add Filter' page for Range/Mask filter creation/editing
• Filter step added to Send route creation (attach/detach; multiple in Expert mode)
• Multiple filters joinable via AND/OR logic
• Attached filters displayed on Manage Routes
• New WLAN operation mode: micro-AP (Network Scan unavailable in this mode)
• INI format version 1.3 with final Filter parameters
• Performance enhancement for page loading

Corrections de bugs

• UDP/route switching field visibility correction
• CAN custom bit rate: lower limit equal calculation error fixed
• CAN-Status: Listen-Only mode displays OK (green)
• Broadcast scan compatible with micro-AP mode
• Layout improvements for browser/mobile support
• Minor bug fixes

Changements

• Range filter operation revised: composed of multiple Mask filters; exact range coverage
• INI format change: filter parameter designation revised (old configs auto-updated; new filters lost on downgrade)
• Overlapping filters now work without issues
• Routes/filters display with unique index identification
• Manage Routes detailed information in Normal user mode
• WLAN operation mode displayed in general information
• Detailed CAN state description texts
• Checkbox/radio button design revision
• Layout changes for readability/accessibility
• Website documentation updated (new Filters section help page added)
• Help pages open in new tabs (not pop-ups; mobile/browser compatibility)

Version 2.4.2 17/03/2015

Corrections de bugs

• WLAN packet corruption/loss in rare cases corrected

Version 2.4.0 25/07/2014

Améliorations

• WLAN operation mode selection form added (Infrastructure/Ad-Hoc/keep active after initialization)
• WEP encryption removed (security vulnerability)
• Help pages added (accessible via 'Help' menu or question mark icons)
• Web design improvements: flexible layout, advanced tooltips, mobile device support

Corrections de bugs

• User-defined Subnet masks now processed correctly (previously replaced with defaults)
• Sub-page titles display corrected

Version 2.3.13 01/04/2014

Améliorations

• CAN channels can be activated/deactivated (Expert Mode)
• Custom bit rate definition with live validation and pre-calculation (Expert Mode)
• Extensive configuration information displayed per CAN channel
• Bit rate selection limited to values within CAN transceiver limits
• File upload buttons disabled until file selected (Software Update, Configuration)
• Mobile web layout adjustments

Version website_1.2.0 27/01/2014

Améliorations

• Auto Power Off function added (Device > Configuration) for PCAN-Wireless Gateways
• New product pictures for entire PCAN-Gateway family
• Manual bit rate setting displayed per CAN channel (Expert mode)

Corrections de bugs

• Incorrect error message on user session loss after reset

Version website_1.1.0 16/12/2013

Améliorations

• New 'Network > WLAN Networks Scan' page for PCAN-Wireless Gateways DR: discovers available networks (SSID, encryption, signal level); single network selection auto-transfers to configuration
• All encryption types (including WEP, none) selectable on WLAN configuration
• Unsecure encryption warning box displayed in navigation
• WLAN region codes selectable (USA, Canada, EU, Japan)

Corrections de bugs

• HTML special characters in login credentials corrected
• Routes > Add/Edit Route: IP Address Source selection no longer appears after failed Broadcast Scan
• Minor text/bug fixes

Changements

• Reboot time increased to 40 seconds
• Drop-down focus highlighting added