Portable diagnostic tool for CAN and CAN FD networks
Compact and affordable, the PCAN-MiniDiag FD is a handheld device designed for basic diagnostics of CAN and CAN FD buses. It allows maintenance technicians and developers to easily access vehicle, machine, or industrial installation networks whose parameters are not known. A bit timing measurement automatically determines the nominal bit rate (CAN) and the data bit rate (CAN FD). The device also includes functions for measuring termination, bus load, and the voltage levels present on the CAN connector.
The membrane keypad and housing of the PCAN-MiniDiag FD give it enhanced protection. It is powered by three replaceable batteries.
The CAN FD (Flexible Data rate) standard is mainly characterized by increased transfer capacity. Each frame can contain up to 64 bytes of data (compared with 8 previously), transmitted at rates of up to 10 Mbit/s. Backward compatible with the CAN 2.0 A/B standard, CAN FD allows CAN FD nodes to be inserted into an existing CAN network (though the CAN FD extensions remain inoperative in that case).
- Communication via High-Speed CAN (ISO 11898-2)Compliant with CAN 2.0 A/B and FD specificationsAllows switching between ISO and non-ISO CAN FD protocolsCAN FD data transfer rate (64 bytes max) from 66.6 kbit/s to 10 Mbit/sCAN transfer rate from 10 kbit/s up to 1 Mbit/sMicrochip MCP2558FD CAN transceiver
- Compliant with CAN 2.0 A/B and FD specifications
- Allows switching between ISO and non-ISO CAN FD protocols
- CAN FD data transfer rate (64 bytes max) from 66.6 kbit/s to 10 Mbit/s
- CAN transfer rate from 10 kbit/s up to 1 Mbit/s
- Microchip MCP2558FD CAN transceiver
- CAN bus connection via 9-pin D-Sub connector (per CiA® 106)
- No impact on the CAN bus thanks to permanent "listen-only" mode
- OLED screen with a resolution of 128 x 128 pixels
- Powered by replaceable batteries (3 x Micro AAA with 1.2 V or 1.5 V)
- Control via a four-key touch keypad
- Plastic housing with increased IP42 protection rating
- Dimensions: 122 x 69 x 44 mm
- Operating temperature range from -10 to 50 °C
- System information:Display of firmware and hardware version, serial number, and battery voltage
- D-Sub voltage:Voltage check at pins 6 and 9 in the range of -40 to +43 V
- CAN Min/Max voltage:measurement of minimum and maximum voltage values for CAN-High and CAN-Low in a range of -5 to +8 V
- CAN voltage:Measurement of dominant and recessive levels for CAN-High and CAN-Low in the range of -5 to +8 V
- CAN voltage 2:Measurement of minimum, average, and maximum values of dominant and recessive levels.
- Termination:Measurement of the termination on the CAN bus
- Bit rate:Automatic bit rate detection via precise bit timing measurements, or manual bit rate configuration
- Bus load:Measurement of CAN bus load with chart display
- Statistics:CAN, CAN FD, and error frame counter
- PCAN-MiniDiag FD in its plastic housing
- Batteries (4 x 1.5 V Micro AAA)
- Manual in PDF format
- Printed quick start guide
Portable diagnostic tool for CAN and CAN FD networks
Compact and affordable, the PCAN-MiniDiag FD is a handheld device designed for basic diagnostics of CAN and CAN FD buses. It allows maintenance technicians and developers to easily access vehicle, machine, or industrial installation networks whose parameters are not known. A bit timing measurement automatically determines the nominal bit rate (CAN) and the data bit rate (CAN FD). The device also includes functions for measuring termination, bus load, and the voltage levels present on the CAN connector.
The membrane keypad and housing of the PCAN-MiniDiag FD give it enhanced protection. It is powered by three replaceable batteries.
The CAN FD (Flexible Data rate) standard is mainly characterized by increased transfer capacity. Each frame can contain up to 64 bytes of data (compared with 8 previously), transmitted at rates of up to 10 Mbit/s. Backward compatible with the CAN 2.0 A/B standard, CAN FD allows CAN FD nodes to be inserted into an existing CAN network (though the CAN FD extensions remain inoperative in that case).
