Four-channel CAN interface for PC/104-Plus systems
The PCAN-PC/104-Plus Quad board connects four CAN networks to a PC/104-Plus system, with the option to stack up to 4 boards. Connection to the CAN bus is made via a 9-pin D-Sub connector mounted on the supplied slot brackets. Galvanic isolation of up to 500 volts separates the computer side from the CAN side.
The PCAN-View CAN monitor for Windows® as well as the PCAN-Basic programming interface are included in the delivery.
D-Sub Description
| 1 | not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | not connected / Optional +5 V |
- PC/104 form factor
- Use of the 120-pin connector for the PCI bus
- Possibility of using up to four cards in a system
- 4 High Speed CAN buses (ISO 11898-2)
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- Connection to the CAN bus via 9-pin D-Sub slot brackets (according to CiA® 106)
- FPGA implementation of the CAN controller (SJA1000 compatible)
- NXP PCA82C251 CAN transceiver
- Galvanic isolation at the CAN connector up to 500 V, separate for each CAN channel
- Possibility of connecting a 5-volt power supply at the CAN connection via a soldered jumper, e.g. for an external bus converter
- Extended operating temperature range, from -40 to +85 °C
- Available as an option: PC104-ISA-Stack-Through connector
- PCAN-PC/104-Plus Quad card
- Two slot brackets equipped with D-Sub connectors for connection to the CAN bus
- Drivers for Windows® 11 (x64), 10 (x64) and Linux
- PCAN-View CAN monitor for Windows®
- PCAN-Basic programming interface for applications with CAN connections
- Programming interfaces for standardized protocols in the automotive sector
- Manual in PDF format
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Tools included: PEAK Settings, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. APIs included: PCAN-Basic, PLIN-API and PCAN-RP1210.
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Software for viewing, transmitting and recording CAN and CAN FD data traffic for Windows® 11 (x64/ARM64), 10 (x86/x64). Note: PCAN-View is installed together with our device driver.
API for developing applications with classic CAN, CAN FD and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications on CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package in the NuGet Gallery. Online documentation is available on our website.
API for developing applications for communication with control units using the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communication with control units using the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control units according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
The Pass-Thru API and connection via the Pass-Thru software to PEAK CAN interfaces. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software and PCAN-ISO-TP API. Documentation is included in the download.
Four-channel CAN interface for PC/104-Plus systems
The PCAN-PC/104-Plus Quad board connects four CAN networks to a PC/104-Plus system, with the option to stack up to 4 boards. Connection to the CAN bus is made via a 9-pin D-Sub connector mounted on the supplied slot brackets. Galvanic isolation of up to 500 volts separates the computer side from the CAN side.
The PCAN-View CAN monitor for Windows® as well as the PCAN-Basic programming interface are included in the delivery.
D-Sub Description
| 1 | not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | not connected / Optional +5 V |
