CAN to IP network gateway in DIN rail housing
The PCAN-Ethernet Gateway DR interconnects separate CAN buses over IP networks. CAN frames are encapsulated in TCP or UDP packets, then routed via the IP network to a remote device. This module has one LAN port and two high-speed CAN interfaces. Its DIN rail housing and extended temperature range make it suitable for industrial environments.
The PCAN-Gateway range is configured via an intuitive web interface. The JSON interface provides an alternative for software-based control. Both access methods provide information on device status, settings, communication interfaces, message routing and filters.
- Two high-speed CAN channels (ISO 11898-2)Complies with CAN 2.0 A/B specificationsTransfer rate from 5 kbit/s up to 1 Mbit/sTJF1441AT CAN transceiver
- Complies with CAN 2.0 A/B specifications
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- TJF1441AT CAN transceiver
- Galvanic isolation up to 500 V between all CAN channels, between the RS-232 channel and the power supply
- Connections for CAN, RS-232, and power supply via a 4-screw Phoenix terminal block connector
- LAN connectionData transmission via TCP or UDPBit rates of 10/100 Mbit/sRJ-45 connector with status LEDs
- Data transmission via TCP or UDP
- Bit rates of 10/100 Mbit/s
- RJ-45 connector with status LEDs
- Device monitoring and configuration via the web interface or the JSON interface
- Software update via the web interface
- Restart and factory reset via a Reset button
- Plastic housing (width: 22.5 mm) for DIN rail mounting (DIN EN 60715 TH35)
- Device status and power LEDs
- RS-232 connector for serial data transfer (reserved for future use)
- Supply voltage 8 to 30 V
- Extended operating temperature range from -40 to +85 °C
- PCAN-Ethernet Gateway DR in its DIN rail housing
- Mating connectors for the CAN and RS-232 channels and for the power supply (Phoenix Contact MSTB 2,5/4-ST BK - 1756298)
- RJ-45 network cable (2 m)
- Manual in PDF format
- Printed quick start guide
This package is used to update the website, software and configuration of the PCAN-Ethernet Gateway DR (IPEH-004010, serial number between 25000 and 28999 and above 31000).
This package is used to update the website, software and configuration of the PCAN-Ethernet Gateway DR (IPEH-004010, serial number between 1 and 24999 and between 29000 and 30999).
This package contains code examples and a Wireshark dissector to help with the development of socket applications that connect to a PCAN gateway.
This is the PEAK-System installation package containing tools and device drivers for Windows® 11 (x64/ARM64), 10 (x64).Note:Select "Virtual PCAN-Gateway" among the available options during installation.
CAN to IP network gateway in DIN rail housing
The PCAN-Ethernet Gateway DR interconnects separate CAN buses over IP networks. CAN frames are encapsulated in TCP or UDP packets, then routed via the IP network to a remote device. This module has one LAN port and two high-speed CAN interfaces. Its DIN rail housing and extended temperature range make it suitable for industrial environments.
The PCAN-Gateway range is configured via an intuitive web interface. The JSON interface provides an alternative for software-based control. Both access methods provide information on device status, settings, communication interfaces, message routing and filters.
