Universal configurable control unit with I/O and CAN FD connectivity
Designed to integrate custom accessories into automotive applications, the PCAN-MicroMod FD ECU offers a CAN FD connection along with a set of analog and digital I/O. Its rugged housing and two automotive-type connectors make it suitable for use in commercial vehicles and trucks, including under harsh conditions.
PCAN-MicroMod FD products are configured using free Windows® software. In addition to direct mapping of I/O to CAN IDs, function blocks allow data processing. Once the configuration is built on the computer and transferred over the CAN bus, the PCAN-MicroMod FD operates as a standalone CAN node.
Requirements
A PEAK-CAN interface is required for configuration.
- Module with integrated PCAN-MicroMod FD
- Communication via High-Speed CAN (ISO 11898-2)Compliant with CAN 2.0 A/B and FD specificationsCAN FD data transfer rate (max. 64 bytes) from 40 kbit/s to 10 Mbit/sCAN transfer rate from 40 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0 A/B and FD specifications
- CAN FD data transfer rate (max. 64 bytes) from 40 kbit/s to 10 Mbit/s
- CAN transfer rate from 40 kbit/s up to 1 Mbit/s
- Wake-up function via the CAN bus or a separate input
- 4 digital inputsConfigurable pull-up / pull-down resistor
- Configurable pull-up / pull-down resistor
- 8 digital outputs with High-side switches2 outputs at 5 A and 6 outputs at 2 A4 usable alternatively as digital input or additionally for output level readback
- 2 outputs at 5 A and 6 outputs at 2 A
- 4 usable alternatively as digital input or additionally for output level readback
- 8 analog inputs16-bit resolutionAdjustable measuring range: ±2.5 V, ±5 V, ±10 V, ±20 V
- 16-bit resolution
- Adjustable measuring range: ±2.5 V, ±5 V, ±10 V, ±20 V
- 4 of the analog inputs can alternatively be used as analog output12-bit resolutionAdjustable voltage range: 0 to 5 V or 0 to 10 V
- 12-bit resolution
- Adjustable voltage range: 0 to 5 V or 0 to 10 V
- 2 frequency outputs"Low-side" power switches (3 A)Adjustable frequency range from 0 to 20 kHzAlternatively usable as analog inputs with a voltage range of 0 to 60 V
- "Low-side" power switches (3 A)
- Adjustable frequency range from 0 to 20 kHz
- Alternatively usable as analog inputs with a voltage range of 0 to 60 V
- Connections for CAN, I/O and power via two 20-pole automotive connectors (Molex MX150)
- Plastic housing with enhanced IP67 protection rating and mounting flange
- Operating voltage from 8 to 32 V; suitable for use in 12 and 24 V vehicle electrical systems
- Extended operating temperature range, -40 to +85 °C
- E1 type approval
- PCAN-MicroMod FD ECU with matching connectors (Molex MX150 A 33472-2001 black and Molex MX150 B 33472-2002 light gray)
- PCAN-MicroMod FD Configuration for Windows®
- Manual in PDF format
- A PEAK-CAN interface is required for configuration
- Version with galvanic isolation of the CAN channel available on request
Configuration software for PCAN-MicroMod FD products for Windows® 11 (x64/ARM64), 10 (x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
Universal configurable control unit with I/O and CAN FD connectivity
Designed to integrate custom accessories into automotive applications, the PCAN-MicroMod FD ECU offers a CAN FD connection along with a set of analog and digital I/O. Its rugged housing and two automotive-type connectors make it suitable for use in commercial vehicles and trucks, including under harsh conditions.
PCAN-MicroMod FD products are configured using free Windows® software. In addition to direct mapping of I/O to CAN IDs, function blocks allow data processing. Once the configuration is built on the computer and transferred over the CAN bus, the PCAN-MicroMod FD operates as a standalone CAN node.
Requirements
A PEAK-CAN interface is required for configuration.
