Configurable measurement data acquisition and processing unit
This thermocouple measurement module features 8 thermocouple inputs, calibrated for the J, K or T temperature ranges depending on the chosen variant.
The central microcontroller pre-processes the measurement data before transmitting it on the CAN bus. The module is configured using Windows® software installed on a computer connected to the same CAN network.
Requirements
A PEAK-CAN interface is required for configuration.
- 8 connections for type J, K and T thermocouples
- 4 measurement channels equipped with 2 channels of the same type, galvanically isolated
- Measurement ranges:J: -210 to +1121 °CK: -200 to +1370 °CT: -200 to +400 °C
- J: -210 to +1121 °C
- K: -200 to +1370 °C
- T: -200 to +400 °C
- Measurement accuracy: 0.2%
- Accuracy of the reference temperature sensors at an ambient temperature of +25 °C: typically ±0.5 K, maximum ±1.0 K
- Temperature accuracy in CAN message data: 1/16 °C
- Message transmission and configuration via High-Speed CAN (ISO 11898-2):Transfer rate from 40 kbit/s up to 1 Mbit/sGalvanic isolation up to 500 VNXP TJA1040 CAN transceiverCompliant with the CAN 2.0 A/B specification
- Transfer rate from 40 kbit/s up to 1 Mbit/s
- Galvanic isolation up to 500 V
- NXP TJA1040 CAN transceiver
- Compliant with the CAN 2.0 A/B specification
- Basic configuration with the "Thermocouple Configuration" software for Windows®
- Advanced configuration via the PPCAN-Editor 2 software for Windows®
- Measurement data pre-processing in an integrated microcontroller
- Extruded aluminum housing with flange. DIN rail mounting on request
- Supply voltage: 6 to 34 V
- Extended operating temperature range, from -40 to +85 °C
- MU-Thermocouple1 CAN in its aluminum housing
- Mating connector included for the power supply (Phoenix Contact MC1.5/2-STF-3.81 - 1827703)
- Thermocouple Configuration software for Windows®
- PPCAN-Editor 2 configuration software for Windows®
- Manual in PDF format
- A PEAK-CAN interface is required for configuration
Configuration software for MU-Thermocouple1 CAN for Windows® 11 (x64/ARM64), 10 (x86/x64).
Configuration software for PCAN-MIO and PCAN-Router Pro for Windows® 11 (x64/ARM64), 10 (x86/x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
Configurable measurement data acquisition and processing unit
This thermocouple measurement module features 8 thermocouple inputs, calibrated for the J, K or T temperature ranges depending on the chosen variant.
The central microcontroller pre-processes the measurement data before transmitting it on the CAN bus. The module is configured using Windows® software installed on a computer connected to the same CAN network.
Requirements
A PEAK-CAN interface is required for configuration.
