CAN board for the PCI/104-Express bus
The PCAN-PCI/104-Express board makes it possible to connect one, two or four CAN networks to a PCI/104-Express system. The stack can extend to up to four boards. Connection to the CAN bus is made via a 9-pin D-Sub connector located on the included slot cover. Galvanic isolation of up to 500 volts protects the computer side from the CAN side. Single-, dual- and four-channel versions are available.
The PCAN-View CAN visualization software for Windows® and the PCAN-Basic programming interface are supplied with the product.
D-Sub pinout
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
- PCI/104-Express card, 1 channel (x1)
- PC/104 form factor
- Possibility of using up to four cards in one system
- 1, 2, or 4 High Speed CAN buses (ISO 11898-2)
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- CAN bus connection via a 9-pin D-Sub slot cover (according to CiA® 106)
- FPGA implementation of CAN controller (SJA1000 compatible)
- NXP PCA82C251 CAN transceiver
- Galvanic isolation at the CAN connector up to 500 V, separate for each CAN channel
- Powered by 5 V only
- Possibility of connecting a 5-volt supply at the CAN connection via a solder jumper, e.g. for an external bus converter
- Extended operating temperature range, -40 to +85 °C
- Optionally available: PCI-104 Stack-Through male connector
- PCAN-PCI/104-Express card
- Slot cover fitted with D-Sub connector(s) for CAN bus connection (two for the four-channel version)
- Drivers for Windows® 11 (x64), 10 (x64), and Linux
- PCAN-View CAN monitor for Windows®
- PCAN-Basic programming interface for applications with CAN connections
- Programming interfaces for automotive industry standardized protocols
- PDF manual
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Tools included: PEAK Settings, PCAN-View, PLIN-View Pro, and Virtual PCAN-Gateway. APIs included: PCAN-Basic, PLIN-API, and PCAN-RP1210.
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Software for viewing, transmitting, and recording CAN and CAN FD data traffic for Windows® 11 (x64/ARM64), 10 (x86/x64). Note: PCAN-View is installed with our device driver.
API for developing applications with CAN CC, CAN FD, and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications on CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package on the NuGet gallery. Online documentation is available on our website.
API for developing applications for communicating with ECUs according to the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communicating with ECUs according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control units according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
Pass-Thru API and connection via the Pass-Thru software to PEAK CAN interfaces. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software, and PCAN-ISO-TP API. Documentation is included in the download.
CAN board for the PCI/104-Express bus
The PCAN-PCI/104-Express board makes it possible to connect one, two or four CAN networks to a PCI/104-Express system. The stack can extend to up to four boards. Connection to the CAN bus is made via a 9-pin D-Sub connector located on the included slot cover. Galvanic isolation of up to 500 volts protects the computer side from the CAN side. Single-, dual- and four-channel versions are available.
The PCAN-View CAN visualization software for Windows® and the PCAN-Basic programming interface are supplied with the product.
D-Sub pinout
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
