CAN board for the PCI bus
The PCAN-PCI board connects a PC equipped with PCI connectors to CAN networks.
Available in single-channel or dual-channel versions, its opto-isolated variants provide galvanic isolation up to 500 volts between the PC and the CAN bus.
The PCAN-View CAN monitor for Windows® and the PCAN-Basic programming interface are included with delivery.
D-Sub pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
- PC expansion card for PCI connector
- 1 or 2 High Speed CAN buses (ISO 11898-2)
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- CAN bus connection via 9-pin D-Sub connector (according to CiA® 106)
- NXP CAN SJA1000 CAN controller with a 16 MHz clock frequency
- NXP PCA82C251 CAN transceiver
- Option to connect a 5 volt power supply at the CAN connection via a soldered jumper, e.g. for an external bus converter
- Galvanic isolation at the CAN connector up to 500 V, separate for each CAN channel (only for IPEH-002066 and IPEH-002067)
- Extended operating temperature range, from -40 to +85 °C
- PCAN-PCI card
- Drivers for Windows® 11 (x64), 10 (x64), and Linux
- PCAN-View CAN monitor for Windows®
- PCAN-Basic programming interface for applications with CAN connections
- Programming interfaces for standardized protocols in the automotive sector
- PDF manual
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Tools included: PEAK Settings, PCAN-View, PLIN-View Pro, and Virtual PCAN-Gateway. APIs included: PCAN-Basic, PLIN-API, and PCAN-RP1210.
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Software for viewing, transmitting, and recording CAN and CAN FD data traffic for Windows® 11 (x64/ARM64), 10 (x86/x64). Note: PCAN-View is installed with our device driver.
API for developing applications with CAN CC, CAN FD, and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications on CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package in the NuGet Gallery. Online documentation is available on our website.
API for developing applications to communicate with control units according to the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications to communicate with control units according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control units according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
The Pass-Thru API and the connection via the Pass-Thru software to PEAK CAN interfaces. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software, and the PCAN-ISO-TP API. Documentation is included in the download.
CAN board for the PCI bus
The PCAN-PCI board connects a PC equipped with PCI connectors to CAN networks.
Available in single-channel or dual-channel versions, its opto-isolated variants provide galvanic isolation up to 500 volts between the PC and the CAN bus.
The PCAN-View CAN monitor for Windows® and the PCAN-Basic programming interface are included with delivery.
D-Sub pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
