CAN interface board in Mini PCI format
The PCAN-miniPCIe board provides the connection to CAN networks for embedded PCs and laptops fitted with a mini PCI connector.
Available in single-channel or dual-channel versions, this board also comes in opto-decoupled variants guaranteeing galvanic isolation of up to 300 volts between the computer side and the CAN bus.
Each product is supplied with the PCAN-View CAN visualization software for Windows® and the PCAN-Basic development API.
D-Sub pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
- Expansion card for Mini PCI connector
- 1 or 2 High Speed CAN buses (ISO 11898-2)
- Connection to the CAN bus is made via a cable and 9-pin D-Sub connectors (per CiA® 106)
- Transfer rate from 40 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- NXP SJA1000 CAN controller with a 16 MHz clock frequency
- NXP TJA1040 CAN transceiver
- Possibility to connect a 5 volt power supply at the CAN connection via a soldered jumper, e.g. for an external bus converter
- Galvanic isolation at the CAN connector up to 300 V, separate for each CAN channel (IPEH-003046 and IPEH-003047 only)
- Operating temperature range 0 to 70 °C
- PCAN-miniPCI card
- Connection cable with D-Sub connector for each channel
- Drivers for Windows® and Linux
- PCAN-View CAN monitor for Windows®
- PCAN-Basic programming interface for applications with CAN connections
- Programming interfaces for standardized automotive protocols
- Manual in PDF format
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Included tools: PEAK Settings, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. Included APIs: PCAN-Basic, PLIN-API and PCAN-RP1210.
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Software for displaying, transmitting and recording CAN and CAN FD data traffic for Windows® 11 (x64/ARM64), 10 (x86/x64). Note: PCAN-View is installed together with our device driver.
API for developing applications with CAN CC, CAN FD and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications over CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package in the NuGet Gallery. Online documentation is available on our website.
API for developing applications over LIN connections for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications to communicate with ECUs according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications to communicate with ECUs according to the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control devices according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
The Pass-Thru API and connection to PEAK CAN interfaces via Pass-Thru software. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software and the PCAN-ISO-TP API. Documentation is included in the download.
CAN interface board in Mini PCI format
The PCAN-miniPCIe board provides the connection to CAN networks for embedded PCs and laptops fitted with a mini PCI connector.
Available in single-channel or dual-channel versions, this board also comes in opto-decoupled variants guaranteeing galvanic isolation of up to 300 volts between the computer side and the CAN bus.
Each product is supplied with the PCAN-View CAN visualization software for Windows® and the PCAN-Basic development API.
D-Sub pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
