CAN interface board in PC/104 format
Compact and designed for embedded systems, the PCAN-PC/104 board provides the link between one or two CAN networks and a PC/104 platform. Interrupt sharing allows several PCAN-PC/104 boards to be used simultaneously without conflict.
Available in single-channel or two-channel configuration, this board also comes in opto-isolated versions offering galvanic isolation of up to 500 volts between the computer side and the CAN bus side.
Each unit is supplied with the PCAN-View CAN monitoring software for Windows® as well as the PCAN-Basic development API.
D-Sub Description
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
- PC/104 form factor
- Possibility of using several PC/104 cards in parallel (Interrupt Sharing)
- For configuration, 14 port addresses and 8 interrupt addresses are available via jumper
- 1 or 2 High Speed CAN buses (ISO 11898-2)
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- Connection to the CAN bus via a 9-pin D-Sub slot bracket (according to CiA® 106)
- NXP SJA1000 CAN controller with a 16 MHz clock frequency
- NXP PCA82C251 CAN transceiver
- Possibility of connecting a 5-volt power supply at the CAN connection via a soldered jumper, e.g. for an external bus converter
- Galvanic isolation at the CAN connector up to 500 V, separate for each CAN channel (only for IPEH-002056 and IPEH-002057)
- Extended operating temperature range, from -40 to +85 °C
- PCAN-PC/104 card
- Slot bracket equipped with D-Sub connector(s) for connection to the CAN bus
- Drivers for Windows® and Linux
- PCAN-View CAN monitor for Windows®
- PCAN-View CAN monitor for DOS
- PCAN-Basic programming interface for applications with CAN connections
- Programming interfaces for standardized protocols in the automotive sector
- Manual in PDF format
PEAK-System installation package for the non-Plug-and-Play 32-bit drivers for PCAN-PC/104, PCAN-ISA and PCAN-Dongle (parallel port) as well as a Plug-and-Play 32/64-bit driver for PCAN-PC Card for Windows® 10 (x86/x64).
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Software for viewing, transmitting and recording CAN and CAN FD data traffic for Windows® 11 (x64/ARM64), 10 (x86/x64). Note: PCAN-View is installed together with our device driver.
API for developing applications with classic CAN, CAN FD and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications on CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package in the NuGet Gallery. Online documentation is available on our website.
API for developing applications on LIN connections for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communication with control units using the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communication with control units using the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control units according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
The Pass-Thru API and connection via the Pass-Thru software to PEAK CAN interfaces. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software and PCAN-ISO-TP API. Documentation is included in the download.
CAN interface board in PC/104 format
Compact and designed for embedded systems, the PCAN-PC/104 board provides the link between one or two CAN networks and a PC/104 platform. Interrupt sharing allows several PCAN-PC/104 boards to be used simultaneously without conflict.
Available in single-channel or two-channel configuration, this board also comes in opto-isolated versions offering galvanic isolation of up to 500 volts between the computer side and the CAN bus side.
Each unit is supplied with the PCAN-View CAN monitoring software for Windows® as well as the PCAN-Basic development API.
D-Sub Description
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
