CAN adapter for the USB port
The PCAN-USB provides simple access to CAN networks. Its compact plastic housing makes it particularly well suited to mobile applications.
The opto-isolated variant includes galvanic isolation of up to 500 volts between the PC and CAN sides.
The PCAN-View CAN monitoring software for Windows® as well as the PCAN-Basic programming interface are supplied with the product.
D-Sub Pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
- USB adapter (Full-Speed mode, compatible with USB 1.1, USB 2.0 and USB 3.0)
- 1 high-speed CAN bus (ISO 11898-2)
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- Resolution of approx. 42 µs for timestamping
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- CAN bus connection via 9-pin D-Sub connector (per CiA® 106)
- NXP SJA1000 CAN controller with a 16 MHz clock frequency
- NXP PCA82C251 CAN transceiver
- Galvanic isolation at the CAN connector up to 500 V (only for IPEH-002022)
- CAN termination can be enabled via a solder jumper
- Possibility of connecting a 5-volt power supply at the CAN connection via a solder jumper, e.g. for an external converter
- Powered via the USB bus
- Extended operating temperature range, from -40 to +85 °C
- PCAN-USB in its plastic housing
- Drivers for Windows® 11 (x64/ARM64), 10 (x64) and Linux
- PCAN-View CAN monitor for Windows®
- PCAN-Basic programming interface for applications with CAN connections
- Programming interfaces for standardized protocols in the automotive sector
- Manual in PDF format
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Included tools: PEAK Settings, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. Included APIs: PCAN-Basic, PLIN-API and PCAN-RP1210.
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications with CAN CC, CAN FD and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications on CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package in the NuGet gallery. Online documentation is available on our website.
API for developing applications for communication with ECUs according to the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control units according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
The Pass-Thru API and connection via the Pass-Thru software to PEAK CAN interfaces. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software and PCAN-ISO-TP API. Documentation included in the download.
CAN adapter for the USB port
The PCAN-USB provides simple access to CAN networks. Its compact plastic housing makes it particularly well suited to mobile applications.
The opto-isolated variant includes galvanic isolation of up to 500 volts between the PC and CAN sides.
The PCAN-View CAN monitoring software for Windows® as well as the PCAN-Basic programming interface are supplied with the product.
D-Sub Pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
| 9 | Not connected / Optional +5 V |
