Configurable CAN FD module with analog I/O
The PCAN-MicroMod FD Analog 1 is a configurable module specially designed for analog inputs and outputs. It consists of a plug-in board integrating the PCAN-MicroMod FD and a base board fitted with spring-cage connectors for CAN, I/O and power connections.
Configuration is done via the Windows® software, mapping I/O to CAN IDs and function blocks. Several modules can operate autonomously on the same CAN bus. CANopen firmware available under license.
- Board with integrated PCAN-MicroMod FD
- Communication via High-Speed CAN (ISO 11898-2)Compliant with CAN 2.0 A/B and FD specificationsCAN FD data transfer rate (max. 64 bytes) from 20 kbit/s to 10 Mbit/sCAN transfer rate from 20 kbit/s up to 1 Mbit/sSwitchable 120 Ohm CAN termination
- Compliant with CAN 2.0 A/B and FD specifications
- CAN FD data transfer rate (max. 64 bytes) from 20 kbit/s to 10 Mbit/s
- CAN transfer rate from 20 kbit/s up to 1 Mbit/s
- Switchable 120 Ohm CAN termination
- 2 frequency outputs"Low Side" power switchesAdjustable frequency range from 0 to 20 kHz
- "Low Side" power switches
- Adjustable frequency range from 0 to 20 kHz
- 1 analog input for voltage monitoring up to 30 V, 12-bit resolution
- 8 analog inputs16-bit resolutionAdjustable measuring range: ±2.5 V, ±5 V, ±10 V, ±20 V
- 16-bit resolution
- Adjustable measuring range: ±2.5 V, ±5 V, ±10 V, ±20 V
- 4 analog inputs12-bit resolutionMeasuring range 0 to 10 V
- 12-bit resolution
- Measuring range 0 to 10 V
- 4 analog outputs12-bit resolutionAdjustable voltage range: 0 to 5 V or 0 to 10 V
- 12-bit resolution
- Adjustable voltage range: 0 to 5 V or 0 to 10 V
- 4 digital inputsConfigurable pull-up / pull-down resistor
- Configurable pull-up / pull-down resistor
- 4-bit rotary coding switch for setting the module ID
- 3 status LEDs
- Aluminum profile housing with cage clamp connectors
- Operating voltage: 8 to 30 V
- Extended operating temperature range, -40 to +85 °C
- PCAN-MicroMod FD (plug-in module)
- Motherboard in aluminum housing with Phoenix Contact connectors
- PCAN-MicroMod FD Configuration software for Windows®
- Windows® development package with GCC ARM Embedded, flash tools and examples
- Manual (PDF)
Configuration software for PCAN-MicroMod FD products for Windows® 11 (x64/ARM64), 10 (x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
Package with CANopen EDS files for PCAN-MicroMod FD products.
Firmware development package for Windows®11 (x64), 10 (x86/x64) with GCC ARM Embedded, PEAK-Flash, programming examples and quick start guide. Supported products: PCAN-MicroMod FD, PCAN-GPS, PCAN-GPS FD, PCAN-Router, PCAN-Router DR, PCAN-Router FD, PCAN-Router Pro, PCAN-Router Pro FD, PCAN-RS-232 and PCAN-RS-232 FD.
Configurable CAN FD module with analog I/O
The PCAN-MicroMod FD Analog 1 is a configurable module specially designed for analog inputs and outputs. It consists of a plug-in board integrating the PCAN-MicroMod FD and a base board fitted with spring-cage connectors for CAN, I/O and power connections.
Configuration is done via the Windows® software, mapping I/O to CAN IDs and function blocks. Several modules can operate autonomously on the same CAN bus. CANopen firmware available under license.
