PCAN-MicroMod base board with digital I/O (High-Side)
The PCAN-MicroMod Digital 2 is a base board dedicated to digital inputs/outputs with High-Side switches. It offers a wide power supply voltage range (8-26 V) and galvanic isolation of the inputs and outputs.
Configuration is performed using the PCAN-MicroMod Configuration software for Windows®. A CANopen firmware is available. Once the configuration has been transferred, the module operates autonomously on the CAN bus.
This product has reached end of life — availability limited to remaining stock.
- Communication via High Speed CAN (ISO 11898-2)Transfer rate from 10 kbit/s up to 1 Mbit/sCompliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- Transfer rate from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- Fully configurable with the PCAN-MicroMod Configuration software for Windows®
- Operating voltage: 8 to 26 V
- LED indicators for voltage supply and digital output status
- Aluminum profile housing with cage clamp connectors. DIN rail mounts optional
- Extended operating temperature range, from -40 to +85 °C
- 8 digital inputs:Pull-up/pull-down circuit selectable by groups (3 groups)Schmitt trigger behavior, invertingHigh threshold = 4.8 V, Low = 1.2 VLow-pass characteristicParallel connection of frequency inputs for 4 digital inputs for alternative use (e.g. frequent state changes, counting)
- Pull-up/pull-down circuit selectable by groups (3 groups)
- Schmitt trigger behavior, inverting
- High threshold = 4.8 V, Low = 1.2 V
- Low-pass characteristic
- Parallel connection of frequency inputs for 4 digital inputs for alternative use (e.g. frequent state changes, counting)
- 5 digital outputs:PCAN-MicroMod Digital 1: 4 Low-Side switches, 45 V max., 0.35 APCAN-MicroMod Digital 2: 4 High-Side switches, 26 V max., 1.1 A1 ultra-fast Low-Side switch, 55 V max., 0.75 A, 10 kHz max. ("frequency output")Short-circuit protection
- PCAN-MicroMod Digital 1: 4 Low-Side switches, 45 V max., 0.35 A
- PCAN-MicroMod Digital 2: 4 High-Side switches, 26 V max., 1.1 A
- 1 ultra-fast Low-Side switch, 55 V max., 0.75 A, 10 kHz max. ("frequency output")
- Short-circuit protection
- PCAN-MicroMod (plug-in module)
- Base board in aluminum housing with Phoenix Contact connectors
- PCAN-MicroMod Configuration software for Windows®
- Manual (PDF)
Package for PCAN-MicroMod, PCAN-MicroMod Evaluation Kit and PCAN-MicroMod base boards. Package including PCAN-MicroMod Configuration software, PCAN-MicroMod firmware, CANopen® firmware, all files for development and documentation (in German and English).
Configuration software for PCAN-MicroMod products for Windows® 11 (x64/ARM64), 10 (x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
PCAN-MicroMod base board with digital I/O (High-Side)
The PCAN-MicroMod Digital 2 is a base board dedicated to digital inputs/outputs with High-Side switches. It offers a wide power supply voltage range (8-26 V) and galvanic isolation of the inputs and outputs.
Configuration is performed using the PCAN-MicroMod Configuration software for Windows®. A CANopen firmware is available. Once the configuration has been transferred, the module operates autonomously on the CAN bus.
This product has reached end of life — availability limited to remaining stock.
