Versatile control unit for CAN applications
The PCAN-MIO (Multiple Input-Output) is a modular, versatile control unit designed for the industrial and automotive sectors.
This module integrates two CAN interfaces as well as several analog and digital inputs and outputs. Received signals can be processed by the microcontroller and then forwarded via the CAN interfaces or the output channels. The behavior of the PCAN-MIO is fully configured using dedicated Windows® software. A wide range of function blocks and settings are available to the user for building the desired configuration.
Plug-in CAN transceivers allow flexible adaptation of each CAN channel to the specific requirements of the application. Low-speed and single-wire CAN transceivers are also available on request.
Requirements
A PEAK-CAN interface is required for configuration.
- 2 High-Speed CAN channels (ISO 11898-2)Compliant with CAN 2.0 A/B specificationsCAN transfer rate from 40 kbit/s up to 1 Mbit/sNXP TJA1041 CAN transceiver with wake-upOthertransceiver modulesavailable on request
- Compliant with CAN 2.0 A/B specifications
- CAN transfer rate from 40 kbit/s up to 1 Mbit/s
- NXP TJA1041 CAN transceiver with wake-up
- Other transceiver modules available on request
- Switchable CAN termination
- Wake-up function using a separate input or the CAN bus
- 8 digital inputs with low-pass behavior
- 8 digital outputs, 2 of which are pulse-width modulated
- 6 analog inputs, unipolar measurement range, 0 to 10 V, 10-bit resolution, sampling rate of 1 kHz
- 2 analog outputs (10 bits, 0 to 10 V)
- Suitable for use in the automotive sector
- Extensive configuration options via the PPCAN-Editor 2 software for Windows®
- The module stores up to 15 configurations
- CAN gateway between buses
- Various function blocks for data links and their modification
- Available with industrial-type connector (Phoenix type) or automotive-type connector (Tyco type)
- Aluminum profile housing with flange. DIN rail mounts available on request
- Voltage supply 9 to 27 V, protection against overvoltage and polarity reversal
- Extended operating temperature range, from -40 to +85 °C
- PCAN-MIO in its aluminum housing with corresponding connector (IPEH-002187: Phoenix Contact FMC 1.5/11-ST-3.5 - 1952351)
- PPCAN-Editor 2 configuration software for Windows®
- Manual in PDF format
- PCAN-MIO in its aluminum housing with corresponding connectors (IPEH-002187: Phoenix Contact FMC 1.5/11-ST-3.5 - 1952351)
- PCAN-USB CAN interface
- PPCAN-Editor 2 configuration software for Windows®
- Manual in PDF format
- A PEAK CAN interface is required for configuration
Configuration software for PCAN-MIO and PCAN-Router Pro for Windows® 11 (x64/ARM64), 10 (x86/x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
Versatile control unit for CAN applications
The PCAN-MIO (Multiple Input-Output) is a modular, versatile control unit designed for the industrial and automotive sectors.
This module integrates two CAN interfaces as well as several analog and digital inputs and outputs. Received signals can be processed by the microcontroller and then forwarded via the CAN interfaces or the output channels. The behavior of the PCAN-MIO is fully configured using dedicated Windows® software. A wide range of function blocks and settings are available to the user for building the desired configuration.
Plug-in CAN transceivers allow flexible adaptation of each CAN channel to the specific requirements of the application. Low-speed and single-wire CAN transceivers are also available on request.
Requirements
A PEAK-CAN interface is required for configuration.
