Bus Converter High-speed CAN to Low-speed CAN
The PCAN-TJA1054 bus converter establishes a connection between a High-speed CAN bus (ISO 11898-2) and a Low-speed CAN bus (ISO 11898-3). One of the most important potential applications of the bus converter is a simple connection between a PEAK CAN interface (e.g. PCAN-USB) and a Low-speed CAN bus.
Pin assignment Female D-Sub Connector
| 1 | 5V Power supply |
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
Pin assignment Male D-Sub Connector
| 2 | CAN-L |
| 3 | GND |
| 6 | GND |
| 7 | CAN-H |
- Adapter from High-speed CAN to Low-speed CAN
- Bit rates up to 125 kbit/s
- CAN transceiver NXP PCA82C251 and TJA1055
- Termination resistors for Low-speed CAN can be switched (560 Ohm / 5.66 kOhm)
- Power LED
- Error LED (Low-speed CAN)
- CAN bus connection via D-Sub,9-pin (in accordance with CiA® 106)
- 5-Volt power supply through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
- Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
- IPEH-002039: Adapter in plastic casing
- Manual in PDF format
Manual PCAN-TJA1054
Bus Converter High-speed CAN to Low-speed CAN
The PCAN-TJA1054 bus converter establishes a connection between a High-speed CAN bus (ISO 11898-2) and a Low-speed CAN bus (ISO 11898-3). One of the most important potential applications of the bus converter is a simple connection between a PEAK CAN interface (e.g. PCAN-USB) and a Low-speed CAN bus.
