CAN Ethernet gateway, bridge and PC interface
The Ixxat CAN@net NT 200 is a multifunctional gateway, connecting CAN networks via Ethernet for remote access and increased reliability. It has two CAN channels and supports long-distance communication, with multiple message processing and cloud connectivity features. For more efficient network management.
Key points
- Three operating modes in a single device — The Ixxat CAN@net NT can be used as a PC interface, as a CAN-Ethernet-CAN bridge, or as a CAN Ethernet gateway – all in a single device.
- PC operating mode with VCI driver support — The Ixxat VCI driver package enables easy integration into Ixxat PC applications and customer-specific programs. Ideal for configuration, analysis and maintenance.
- Bridge mode enables CAN system expansion — Bridge mode enables easy exchange of messages between CAN systems, including over Ethernet – to set up tree or star topologies or to enable long-distance communication.
- CAN Ethernet gateway for flexible access — In gateway mode, the device is accessible regardless of operating system or platform, via a simple ASCII protocol over a TCP/IP socket.
- Savings through simplified cabling — Optimized topologies allow simpler cabling, reducing the number of cables and installation and maintenance costs.
- Onboard intelligence — Advanced filtering, ID translation, data mapping and multiplexing features streamline network traffic and improve efficiency.
- Customizable actions — Additional LUA action-rule programming for responses tailored to specific network events.
- Device and system protection — Network segmentation with galvanic isolation protects devices against damage caused by voltage spikes.
- Cloud connectivity — MQTT support enables direct transmission of information to the cloud, facilitating IoT and remote monitoring applications.
- Configurable security levels — Defined access levels for configuration or firmware upload.
- Easy configuration and maintenance — The Windows configuration tool enables easy configuration and maintenance via USB or Ethernet.
- Support for Linux and QNX — Using the free ECI driver package, the hardware can be easily integrated into Linux-based environments as well as into applications under the QNX real-time operating system. 32- and 64-bit ARM (Raspberry Pi) and Intel X86 platforms are supported.
CAN specifications
| CAN mode | CAN high-speed (ISO 11898-2:2016) |
| CAN bit rate | 5 kBit/s to 1 MBit/s |
General
| Net width (mm) | 99 mm |
| Net height (mm) | 114.5 mm |
| Net depth (mm) | 22.5 mm |
| Net weight (g) | 165 g |
| Packed width (mm) | 14 mm |
| Packed height (mm) | 4 mm |
| Packed depth (mm) | 18 mm |
| Packed weight (g) | 296 g |
| Mounting | DIN rail mounting (bracket included) |
| Rated current consumption (mA) | 110 mA (24 V DC), 230 mA (12 V DC) |
| Input voltage (V) | 9 V to 36 V DC, with overvoltage and reverse polarity protection |
| Isolation | 1 kV DC for 1 sec. |
| Operating temperature °C min. | -40 °C |
| Operating temperature °C max. | 85 °C |
| Storage temperature °C min. | -40 °C |
| Storage temperature °C max. | 85 °C |
| Relative humidity | 10 to 95 %, non-condensing |
| Housing materials | Polyamide housing for top hat rail mounting |
| Packaging material | Cardboard |
| Warranty (years) | 1 |
| Configuration | The Ixxat CAN@net NT series is configured and updated using a simple Windows configuration tool via USB or Ethernet. This tool simplifies the configuration of filters, mapping, multiplexers or translation rules, without requiring any programming expertise. |
Certifications and standards
| CE | Yes |
| UL | Yes |
| FCC | Yes |
| WEEE category | IT and telecommunications equipment |
| cULus | Yes |
| IP protection rating | IP20 |
| UKCA | Yes |
Physical characteristics
| Contains a battery | No |
| Connectors / Inputs / Outputs | 1 x RJ45 connector, 1 x Mini USB port, 3 x screw terminals (2 x fieldbus, 1 x power) |
- CAN@net NT device
- User manual
- Mini USB cable
- available as free download: CAN-Gateway Configurator tool
- CAN driver VCI
- Simple CAN monitor «canAnalyser Mini»
Datasheet
CAN Ethernet gateway, bridge and PC interface
The Ixxat CAN@net NT 200 is a multifunctional gateway, connecting CAN networks via Ethernet for remote access and increased reliability. It has two CAN channels and supports long-distance communication, with multiple message processing and cloud connectivity features. For more efficient network management.
Key points
- Three operating modes in a single device — The Ixxat CAN@net NT can be used as a PC interface, as a CAN-Ethernet-CAN bridge, or as a CAN Ethernet gateway – all in a single device.
- PC operating mode with VCI driver support — The Ixxat VCI driver package enables easy integration into Ixxat PC applications and customer-specific programs. Ideal for configuration, analysis and maintenance.
- Bridge mode enables CAN system expansion — Bridge mode enables easy exchange of messages between CAN systems, including over Ethernet – to set up tree or star topologies or to enable long-distance communication.
- CAN Ethernet gateway for flexible access — In gateway mode, the device is accessible regardless of operating system or platform, via a simple ASCII protocol over a TCP/IP socket.
- Savings through simplified cabling — Optimized topologies allow simpler cabling, reducing the number of cables and installation and maintenance costs.
- Onboard intelligence — Advanced filtering, ID translation, data mapping and multiplexing features streamline network traffic and improve efficiency.
- Customizable actions — Additional LUA action-rule programming for responses tailored to specific network events.
- Device and system protection — Network segmentation with galvanic isolation protects devices against damage caused by voltage spikes.
- Cloud connectivity — MQTT support enables direct transmission of information to the cloud, facilitating IoT and remote monitoring applications.
- Configurable security levels — Defined access levels for configuration or firmware upload.
- Easy configuration and maintenance — The Windows configuration tool enables easy configuration and maintenance via USB or Ethernet.
- Support for Linux and QNX — Using the free ECI driver package, the hardware can be easily integrated into Linux-based environments as well as into applications under the QNX real-time operating system. 32- and 64-bit ARM (Raspberry Pi) and Intel X86 platforms are supported.
