CAN and LIN adapter on high-speed USB 2.0
The PCAN-USB Pro connects a PC to CAN and LIN networks. Two fieldbuses can operate simultaneously, and up to four (2 x CAN, 2 x LIN) with the appropriate adapter cables.
Its particularly robust aluminum housing makes the PCAN-USB Pro suitable for mobile use.
The PCAN-View and PLIN-View Pro display software, as well as the PCAN-Basic and PLIN programming interfaces, round out the delivery contents.
D-Sub Pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | CAN-GND |
| 4 | LIN |
| 5 | LIN-GND |
| 6 | LIN-GND |
| 7 | CAN-H |
| 9 | VBAT |
- Adapter for high-speed USB 2.0 connection (compatible with USB 1.1 and USB 3.0)
- Transmission and reception of CAN and LIN messages via 2 D-Sub connectors (pins for CAN bus and LIN bus on each)
- Resolution of 1 µs for timestamping
- Possibility of connecting a 5-volt power supply at the D-Sub connection via a solder jumper, e.g. for an external converter
- Powered via the USB bus
- Extended operating temperature range, from -40 to +85 °C
- Transfer rate from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- MAX3057ASA CAN transceiver
- Each CAN channel is isolated from USB and opto-isolated from the LIN bus
- Bus load measurement, in particular error frames and overload frames
- Secondary error generation for incoming and outgoing CAN messages
- Transfer rate from 1 kbit/s up to 20 kbit/s
- AMIS-30600 LIN transceiver
- Opto-isolation of both LIN channels (common ground) from USB/CAN
- Implementation as LIN master or slave (1 ms resolution for the master task)
- Automatic detection of transmission rate, frame length and checksum type
- Autonomous scheduling with support for unconditional, event-triggered and sporadic frames
- Hardware processing of a schedule table (up to 8 schedule tables with a total of 256 slots can be configured)
- PCAN-USB Pro in its aluminum housing
- CAN FD drivers for Windows® and Linux
- LIN drivers for Windows® and Linux
- PCAN-View CAN monitor for Windows®
- PLIN-View Pro LIN monitor for Windows®
- PCAN-Basic programming interface for applications with CAN connections
- PLIN-API programming interface for applications with LIN connections
- Programming interfaces for standardized protocols in the automotive sector
- Manual in PDF format
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Included tools: PEAK Settings, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. Included APIs: PCAN-Basic, PLIN-API and PCAN-RP1210.
Device driver for PEAK CAN interfaces from kernel 2.6 onward.
Device driver for PEAK LIN interfaces.
Software for viewing, transmitting and recording CAN and CAN FD data traffic for Windows® 11 (x64/ARM64), 10 (x86/x64).Note: PCAN-View is installed with our device driver.
API for developing applications with CAN CC, CAN FD and CAN XL connections for Windows® 11 (x64/ARM64), 10 (x64).
API for developing applications on CAN connections for Linux.
The PCAN-Basic.NET assembly is available as a package in the NuGet gallery. Online documentation is available on our website.
API for developing applications on LIN connections for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communication with ECUs according to the Universal Measurement and Calibration Protocol (XCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for developing applications for communication with ECUs according to the CAN Calibration Protocol (CCP) for Windows® 11 (x64/ARM64), 10 (x86/x64).
API for transmitting data packets according to the ISO-TP standard (ISO 15765-2) for Windows® 11 (x64/ARM64), 10 (x64).
API for communicating with control units according to UDS (ISO 14229-1) for Windows® 11 (x64/ARM64), 10 (x64).
API for vehicle diagnostics according to OBD-2 (ISO 15765-4) for Windows® 11 (x64/ARM64), 10 (x64).
The Pass-Thru API and connection via the Pass-Thru software to PEAK CAN interfaces. The installation for Windows® 11 (x64/ARM64), 10 (x64) includes: interface DLLs, configuration software and PCAN-ISO-TP API. Documentation included in the download.
CAN and LIN adapter on high-speed USB 2.0
The PCAN-USB Pro connects a PC to CAN and LIN networks. Two fieldbuses can operate simultaneously, and up to four (2 x CAN, 2 x LIN) with the appropriate adapter cables.
Its particularly robust aluminum housing makes the PCAN-USB Pro suitable for mobile use.
The PCAN-View and PLIN-View Pro display software, as well as the PCAN-Basic and PLIN programming interfaces, round out the delivery contents.
D-Sub Pinout
| 1 | Not connected / Optional +5 V |
| 2 | CAN-L |
| 3 | CAN-GND |
| 4 | LIN |
| 5 | LIN-GND |
| 6 | LIN-GND |
| 7 | CAN-H |
| 9 | VBAT |
