LIN adapter for USB port
The PLIN-USB connects a Windows® computer to a LIN network via the USB port. This LIN interface complies with the LIN protocol under the ISO 17987 standard and meets all LIN specifications up to version 2.2. It can operate in either Master or Slave mode.
The PLIN-View Pro visualization software and the PLIN-API programming interface for developing LIN-connected applications are included with delivery.
D-Sub description
| 4 | LIN |
| 5 | GND |
| 6 | GND |
| 9 | VBAT |
- LIN interface for USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0 and USB 3.0)
- 1 LIN bus (ISO 17987)
- Compliant with all LIN specifications (up to version 2.2)
- Transfer rate from 1 kbit/s up to 20 kbit/s
- Can be implemented as LIN master or slave (1 ms resolution for the master task)
- Automatic detection of transmission speed, frame length and checksum type
- Autonomous scheduling with support for unconditional, event-triggered and sporadic frames
- LIN bus connection via 9-pin D-Sub connector
- The LIN connection is protected against short circuits from the transceiver supply and ground
- LIN transceiver NXP TJA1028T or TI TLIN1028D
- Galvanic isolation at the LIN connector up to 500 V
- LED indicator showing interface status
- 5 V DC supply via the USB port
- 6 to 28 V DC transceiver supply via pin 9 of the D-Sub connector
- Extended operating temperature range, -40 to +85 °C
- PLIN-USB in its plastic housing
- LIN drivers for Windows® 11 (x64/ARM64), 10 (x64) and Linux
- PLIN-View Pro LIN monitor for Windows®
- PLIN-API programming interface for applications with LIN connections
- Manual in PDF format
PEAK-System installation package containing tools and device drivers for our PC interfaces for Windows® 11 (x64/ARM64), 10 (x64). Tools included: PEAK Settings, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway. APIs included: PCAN-Basic, PLIN-API and PCAN-RP1210.
Device driver for PEAK LIN interfaces.
API for developing applications for LIN connections on Windows® 11 (x64/ARM64), 10 (x86/x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
LIN adapter for USB port
The PLIN-USB connects a Windows® computer to a LIN network via the USB port. This LIN interface complies with the LIN protocol under the ISO 17987 standard and meets all LIN specifications up to version 2.2. It can operate in either Master or Slave mode.
The PLIN-View Pro visualization software and the PLIN-API programming interface for developing LIN-connected applications are included with delivery.
D-Sub description
| 4 | LIN |
| 5 | GND |
| 6 | GND |
| 9 | VBAT |
