Industrial CANopen and CANopen FD module for digital I/O applications
The PCAN-MicroMod FD DR CANopen Digital 1 is an I/O module designed for CANopen® and CANopen FD® networks. The CANopen FD® standard addresses the growing need for data transmission from sensors, machines and complex production facilities. This module features a CAN FD interface as well as 8 digital inputs and 8 digital outputs. Its DIN rail housing and wide temperature range make it suitable for industrial environments.
The node ID and bit rates are set using potentiometers, so commissioning requires no configuration software. Support for the CANopen® and CANopen FD® standards ensures seamless integration into existing networks.
The PCAN-MicroMod FD DR CANopen Digital 1 was developed in partnership with Embedded Systems Academy, a CANopen® specialist. Its compliance with the CANopen® and CANopen FD® standards has been verified and certified by the CAN in Automation (CiA®) association.
- I/O module for CANopen® and CANopen FD®Communication profiles according to CiA® 301 version 4.2.0 and CiA® 1301 version 1.1.0Device profiles according to CiA® 401 version 3.0.0 and CiA® 401-B/F version 1.0.0
- Communication profiles according to CiA® 301 version 4.2.0 and CiA® 1301 version 1.1.0
- Device profiles according to CiA® 401 version 3.0.0 and CiA® 401-B/F version 1.0.0
- Communication via High-Speed CAN (ISO 11898-2)Selectable CANopen bit rates:Nominal: 20, 50, 125, 250, 500, 800 and 1000 kbit/sSelectable CANopen FD bit rates:Nominal: 250, 500, 800 and 1000 kbit/sData: 1, 2, 4, 5, 8 and 10 Mbit/sNXP TJA1044GT CAN transceiverGalvanic isolation from the power supply up to 500 V
- Selectable CANopen bit rates:Nominal: 20, 50, 125, 250, 500, 800 and 1000 kbit/s
- Selectable CANopen FD bit rates:Nominal: 250, 500, 800 and 1000 kbit/sData: 1, 2, 4, 5, 8 and 10 Mbit/s
- NXP TJA1044GT CAN transceiver
- Galvanic isolation from the power supply up to 500 V
- Configuration of CAN and CAN FD bit rates and node ID using potentiometers on the housing
- 2 "RUN" and "ERROR" LEDs for status indication according to CiA® DR 303-3
- 8 digital inputsCompliant with IEC 61131-2Input characteristics: Type 32 groups of 4 inputs usable as type P (sinking input) or type M (sourcing input)Galvanic separation of digital inputs 0 to 3 and 4 to 7, each up to 100 V from the module power supply
- Compliant with IEC 61131-2
- Input characteristics: Type 3
- 2 groups of 4 inputs usable as type P (sinking input) or type M (sourcing input)
- Galvanic separation of digital inputs 0 to 3 and 4 to 7, each up to 100 V from the module power supply
- 8 digital outputs500 mA load per High-side outputThermal protection for each outputShort-circuit detection for each outputOpen-load detection in active state (1) and inactive state (0) on each output
- 500 mA load per High-side output
- Thermal protection for each output
- Short-circuit detection for each output
- Open-load detection in active state (1) and inactive state (0) on each output
- LEDs for indicating the status of digital inputs and outputs
- Connections for CAN, I/O and power via a 5-pin Phoenix screw terminal connector
- Plastic housing (width: 22.5 mm) designed for DIN rail mounting (DIN EN 60715 TH35)
- Supply voltage 8 to 36 V
- Extended operating temperature range, -40 to +85 °C
- PCAN-MicroMod FD DR CANopen Digital 1 in a DIN rail plastic housing with matching connectors (Phoenix Contact MC 1.5/ 5-ST-3.5 GY7035 - 1769087)
- CANopen EDS file
- Manual in PDF format
Package with CANopen EDS file for the PCAN-MicroMod FD DR CANopen Digital 1.
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
Industrial CANopen and CANopen FD module for digital I/O applications
The PCAN-MicroMod FD DR CANopen Digital 1 is an I/O module designed for CANopen® and CANopen FD® networks. The CANopen FD® standard addresses the growing need for data transmission from sensors, machines and complex production facilities. This module features a CAN FD interface as well as 8 digital inputs and 8 digital outputs. Its DIN rail housing and wide temperature range make it suitable for industrial environments.
The node ID and bit rates are set using potentiometers, so commissioning requires no configuration software. Support for the CANopen® and CANopen FD® standards ensures seamless integration into existing networks.
The PCAN-MicroMod FD DR CANopen Digital 1 was developed in partnership with Embedded Systems Academy, a CANopen® specialist. Its compliance with the CANopen® and CANopen FD® standards has been verified and certified by the CAN in Automation (CiA®) association.
