Versatile plug-in board with I/O and CAN FD connectivity
The PCAN-MicroMod FD is a compact plug-in board featuring a CAN and CAN FD connection on one side, and various physical inputs and outputs on the other. The logical link between the two interfaces is handled by the NXP LPC54618 microcontroller. The PCAN-MicroMod FD gives electronics developers a simple way to integrate I/O functionality with CAN connectivity into their projects.
The PCAN-MicroMod FD is configured via the supplied Windows® software. In addition to direct mapping of I/O to CAN IDs, function blocks are available for data processing. The configuration built on the computer is transmitted over the CAN bus to the PCAN-MicroMod FD, which then operates as a standalone CAN node. Several modules can be configured independently on the same CAN bus.
Ready-to-use base boards in aluminum housings, as well as an evaluation board for developing custom applications, are available for the PCAN-MicroMod FD. All PCAN-MicroMod FD products can also run with CANopen firmware. Corresponding licenses are available from our partner Embedded Systems Academy.
Requirements
A PEAK-CAN interface is required for configuration.
Pin adapter
The pin headers of the PCAN-MicroMod FD use a 50 mil/1.27 mm pitch. To use the PCAN-MicroMod FD on boards with a 100 mil/2.54 mm pitch, an adapter board is available. Further information can be found in the PCAN-MicroMod FD documentation.
- Plug-in card with 2 double-pin strips of 50 pins each, 50 mil (1.27 mm) grid spacing
- NXP LPC54618 microcontroller with Arm® Cortex® M4 core
- Communication via High-Speed CAN (ISO 11898-2)Compliant with CAN 2.0 A/B and FD specificationsCAN FD data transfer rate (max. 64 bytes) from 20 kbit/s to 10 Mbit/sCAN transfer rate from 20 kbit/s up to 1 Mbit/sMicrochip MCP2558FD CAN transceiver
- Compliant with CAN 2.0 A/B and FD specifications
- CAN FD data transfer rate (max. 64 bytes) from 20 kbit/s to 10 Mbit/s
- CAN transfer rate from 20 kbit/s up to 1 Mbit/s
- Microchip MCP2558FD CAN transceiver
- 8 analog inputsUnipolar measuring range 0 to 3 V12-bit resolution, 1 kHz sampling rate
- Unipolar measuring range 0 to 3 V
- 12-bit resolution, 1 kHz sampling rate
- 8 digital inputs
- 8 digital outputs
- 2 frequency outputs
- Selective configuration of up to 16 devices in a CAN network based on the module ID
- Supply voltage 3.3 V
- Dimensions: 33 x 36 mm
- Extended operating temperature range, -40 to +85 °C
- PCAN-MicroMod FD
- PCAN-MicroMod FD Configuration for Windows®
- Windows® development package with GCC ARM Embedded, flash program and programming examples
- Manual in PDF format
- Requirements
- A PEAK-CAN interface is required for configuration
Configuration software for PCAN-MicroMod FD products for Windows® 11 (x64/ARM64), 10 (x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters for Windows® 11 (x64/ARM64), 10 (x64).
Package with CANopen EDS files for PCAN-MicroMod FD products.
Firmware development package for Windows®11 (x64), 10 (x86/x64) with GCC ARM Embedded, PEAK-Flash, programming examples and quick start guide. Supported products: PCAN-MicroMod FD, PCAN-GPS, PCAN-GPS FD, PCAN-Router, PCAN-Router DR, PCAN-Router FD, PCAN-Router Pro, PCAN-Router Pro FD, PCAN-RS-232 and PCAN-RS-232 FD.
This package contains library files (Altium Designer file formats) that can be used for simplified integration of the PCAN-MicroMod FD into your own PCB designs.
Versatile plug-in board with I/O and CAN FD connectivity
The PCAN-MicroMod FD is a compact plug-in board featuring a CAN and CAN FD connection on one side, and various physical inputs and outputs on the other. The logical link between the two interfaces is handled by the NXP LPC54618 microcontroller. The PCAN-MicroMod FD gives electronics developers a simple way to integrate I/O functionality with CAN connectivity into their projects.
The PCAN-MicroMod FD is configured via the supplied Windows® software. In addition to direct mapping of I/O to CAN IDs, function blocks are available for data processing. The configuration built on the computer is transmitted over the CAN bus to the PCAN-MicroMod FD, which then operates as a standalone CAN node. Several modules can be configured independently on the same CAN bus.
Ready-to-use base boards in aluminum housings, as well as an evaluation board for developing custom applications, are available for the PCAN-MicroMod FD. All PCAN-MicroMod FD products can also run with CANopen firmware. Corresponding licenses are available from our partner Embedded Systems Academy.
Requirements
A PEAK-CAN interface is required for configuration.
Pin adapter
The pin headers of the PCAN-MicroMod FD use a 50 mil/1.27 mm pitch. To use the PCAN-MicroMod FD on boards with a 100 mil/2.54 mm pitch, an adapter board is available. Further information can be found in the PCAN-MicroMod FD documentation.
