PCAN-MicroMod base board for dedicated applications
PCAN-MicroMod base boards provide a framework suited to concrete application needs. They are characterized by a wide power supply voltage range as well as protective coupling on the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod base boards.
The Mix 3 base board provides access to all of the PCAN-MicroMod's inputs and outputs, opening up a wide range of possibilities in both the automotive sector and industry.
Requirements
A PEAK-CAN interface is required for configuration.
- Communication via High-Speed CAN (ISO 11898-2)Transfer rate from 10 kbit/s up to 1 Mbit/sCompliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- Transfer rate from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN 2.0A (11-bit ID) and 2.0B (29-bit ID) specifications
- Fully configurable with the PCAN-MicroMod Configuration Windows® software
- Operating voltage: 12 V DC nominal, 8 to 26 V possible
- LED indicators showing supply voltage and digital output status
- Plastic housing equipped with Tyco-Automotive connectors
- Extended operating temperature range, from -40 to +85 °C
- 8 analog inputs:Unipolar measuring range 0 to 4.1 V (can be extended using a voltage divider)10-bit resolution, 1 kHz sampling rateOvervoltage and undervoltage protectionLow-pass characteristic
- Unipolar measuring range 0 to 4.1 V (can be extended using a voltage divider)
- 10-bit resolution, 1 kHz sampling rate
- Overvoltage and undervoltage protection
- Low-pass characteristic
- 8 digital inputs:Inverting Schmitt trigger behaviorHigh threshold = 4.8 V, Low = 1.2 VPull-up or pull-down resistor selectable for each inputLow-pass characteristic
- Inverting Schmitt trigger behavior
- High threshold = 4.8 V, Low = 1.2 V
- Pull-up or pull-down resistor selectable for each input
- Low-pass characteristic
- 4 frequency inputs (as opposed to digital inputs):Scannable frequency range 0 to 10 kHz
- Scannable frequency range 0 to 10 kHz
- 8 digital outputs:"High Side" power switches, continuous current 350 mA, short-circuit current 500 mA4 outputs also usable as "Low Side" power switches, continuous current 700 mA, short-circuit current 1 AShort-circuit protection
- "High Side" power switches, continuous current 350 mA, short-circuit current 500 mA
- 4 outputs also usable as "Low Side" power switches, continuous current 700 mA, short-circuit current 1 A
- Short-circuit protection
- 4 PWM/frequency outputs:"Low Side" power switches, continuous current 350 mA, short-circuit current 1 A2 outputs also usable as "High Side" power switches, continuous current 1.5 A, short-circuit current 5 AShort-circuit protection
- "Low Side" power switches, continuous current 350 mA, short-circuit current 1 A
- 2 outputs also usable as "High Side" power switches, continuous current 1.5 A, short-circuit current 5 A
- Short-circuit protection
- PCAN-MicroMod
- PCAN-MicroMod base board in its housing with Tyco connectors, including ready-to-crimp contacts
- PCAN-MicroMod Configuration software for Windows®
- Manual in PDF format
- A PEAK-CAN interface is required for configuration
Package for PCAN-MicroMod, the PCAN-MicroMod Evaluation Kit, and the PCAN-MicroMod base boards. Package including the PCAN-MicroMod Configuration software, the PCAN-MicroMod firmware, the CANopen® firmware, all development files, and documentation (in German and English).
Configuration software for PCAN-MicroMod products for Windows® 11 (x64/ARM64), 10 (x64).
Easy-to-use tool for updating the firmware of PEAK-System hardware products and CAN and LIN adapters, for Windows® 11 (x64/ARM64), 10 (x64).
PCAN-MicroMod base board for dedicated applications
PCAN-MicroMod base boards provide a framework suited to concrete application needs. They are characterized by a wide power supply voltage range as well as protective coupling on the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod base boards.
The Mix 3 base board provides access to all of the PCAN-MicroMod's inputs and outputs, opening up a wide range of possibilities in both the automotive sector and industry.
Requirements
A PEAK-CAN interface is required for configuration.
